25 Questions About Your Water, Answered
Detailed answers from certified water treatment professionals — covering everything from tap water safety and hard water to reverse osmosis, water testing, and finding the right specialist.
Water Quality & Contaminants
The most frequently detected contaminants include chlorine and chloramines (added for disinfection), lead (from old pipes and fixtures), nitrates (from agricultural runoff), arsenic (naturally occurring in many aquifers), PFAS "forever chemicals" (from industrial sources and firefighting foam), and disinfection byproducts like trihalomethanes and haloacetic acids. The specific mix varies significantly by location — your municipal utility is required to publish an annual Consumer Confidence Report, and you can also check our free Tap Water Report tool.
Check your local water reportMost U.S. municipal tap water meets EPA legal standards, but "meets legal limits" and "is without health risk" are not the same thing. Many legal limits are decades old and were set considering treatment costs, not purely health science. For example, the legal limit for nitrates is 10 mg/L, but health guidelines suggest concern at lower levels for infants. Checking your utility's Consumer Confidence Report — or running a ZIP lookup on our Water Report — shows exactly what's in your water and how it compares to independent health guidelines.
Look up your ZIP codeHealth guidelines (sometimes called health advisories) are non-enforceable benchmarks set by scientists at levels considered safe for lifetime exposure, often calibrated for the most sensitive populations such as infants and pregnant women. "Times above health guideline" shows how much higher the detected level is compared to that scientific benchmark — even when the contaminant is technically within legal limits. A reading of "10× above health guideline" means the detected level is 10 times what scientists consider the health-protective threshold.
See your local readingsPFAS (per- and polyfluoroalkyl substances) are a group of thousands of man-made chemicals used in non-stick cookware, food packaging, waterproof clothing, and firefighting foam since the 1940s. They earn the "forever chemicals" label because they do not break down in the environment or in the human body. Long-term exposure has been linked to thyroid disease, immune suppression, certain cancers, and reproductive issues. In 2024, the EPA established the first enforceable PFAS limits in drinking water (4 parts per trillion for PFOA and PFOS). Reverse osmosis and activated carbon filters are the most effective at-home treatment options.
Check PFAS levels in your areaThe rotten egg odor is caused by hydrogen sulfide gas — a naturally occurring compound produced when sulfur bacteria break down organic matter in groundwater. It's most common in well water but can appear in municipal supplies too. Low concentrations (under 1 mg/L) are not typically a health hazard but are extremely unpleasant. Treatment options include aeration, chlorination, or specialized sulfur filters, depending on the concentration and whether the smell is present in hot water, cold water, or both.
Diagnose your water issueChlorine is added to municipal water as a disinfectant to kill bacteria and viruses during treatment and distribution. While safe at regulated levels, many people find the taste or smell unpleasant — especially when chlorine reacts with organic matter to form chloramines, which have a stronger "pool water" smell. A whole-house carbon filter or a simple pitcher filter can remove most chlorine taste and odor. If the smell is unusually strong, contact your water utility, as they may have recently increased disinfectant levels.
Lead is almost never present in the source water used by utilities. Instead, it leaches into water from lead service lines, lead solder in older copper plumbing, and brass faucets or fixtures manufactured before 2014. The older the home, the higher the risk — homes built before 1986 are most likely to have lead components. There is no safe level of lead for children. If you suspect lead, flush your tap for 2 minutes before using water for drinking or cooking, and consider point-of-use certified NSF/ANSI 53 filters while you arrange professional testing.
Find a certified water specialistWater Softeners
Hard water leaves behind telltale signs: white crusty buildup (limescale) around faucets, showerheads, and in kettles; soap that doesn't lather well or leaves a film; dishes with spots after washing; and laundry that feels stiff or looks dingy over time. Skin dryness and hair that feels dull after washing are also common complaints. Hardness is measured in grains per gallon (GPG) — water above 7 GPG is considered hard, and above 10.5 GPG is very hard. A water test or a free on-site evaluation from a local EcoWater dealer will tell you exactly where you stand.
Identify your water problemA water softener removes hardness minerals — primarily calcium and magnesium — using a process called ion exchange. Water flows through a resin tank packed with negatively charged beads that attract and hold the positively charged calcium and magnesium ions, releasing sodium ions in their place. Over time, the resin becomes saturated and must be regenerated by flushing it with a brine (salt) solution that washes away the captured minerals and recharges the beads. Modern demand-initiated regeneration softeners only regenerate when needed, saving salt and water compared to older timer-based models.
For most people, softened water is perfectly safe to drink. The ion-exchange process replaces calcium and magnesium with a small amount of sodium — typically 20–40 mg of sodium per 8 oz glass for moderately hard water. That's well below the FDA's daily value of 2,300 mg. However, people on strict sodium-restricted diets or with kidney disease should consult their doctor, or use a dedicated unsoftened line or reverse osmosis system for drinking and cooking water. Softened water is not recommended for mixing infant formula or watering sodium-sensitive plants.
Salt usage depends on your water hardness, household water consumption, and softener efficiency. A typical family of four with moderately hard water (10–15 GPG) might use 10–20 lbs of salt per week. High-efficiency softeners like EcoWater's ERR series can reduce salt use by 30–50% compared to older models through precision regeneration. Salt bridges (a crust that forms above the water in the brine tank) can cause the softener to stop working — check the tank monthly and break up any crust you find.
A traditional salt-based softener actually removes hardness minerals from the water through ion exchange, producing genuinely soft water that doesn't leave scale and dramatically improves soap lathering and laundry performance. Salt-free "softeners" (more accurately called water conditioners or descalers) use template-assisted crystallization (TAC) to change the physical structure of calcium and magnesium so they're less likely to form scale — but the minerals remain in the water. Salt-free systems can reduce scale buildup in pipes and appliances but do not produce the same soap and skin benefits as true softening.
Reverse Osmosis Systems
Reverse osmosis (RO) forces water under pressure through a semi-permeable membrane with pores so small (0.0001 microns) that dissolved salts, heavy metals, nitrates, PFAS, and most other contaminants cannot pass through — only water molecules do. A typical under-sink RO system also includes a sediment pre-filter (removes particles), a carbon pre-filter (removes chlorine to protect the membrane), the RO membrane itself, a carbon post-filter (final polishing), and a pressurized storage tank. RO removes 90–99% of most dissolved contaminants and is one of the most effective point-of-use treatment methods available.
Yes — RO membranes remove both harmful and beneficial minerals like calcium, magnesium, and potassium. For most people eating a varied diet, this is not a health concern because drinking water contributes only a small fraction of daily mineral intake compared to food. However, if mineral taste is important to you, remineralization filters or calcite post-filters can add back beneficial minerals and raise pH. Permeate pumps or tank-less RO systems also address the traditional "wastewater" concern — modern high-efficiency systems waste as little as 1:1 water-to-purified ratio, down from the older 3:1 or 4:1 ratio.
A typical under-sink RO system has three maintenance intervals: pre-filters and post-filters (sediment and carbon) every 6–12 months, and the RO membrane itself every 2–3 years with normal city water use. Skipping filter changes lets chlorine reach the membrane and shorten its life significantly. Most EcoWater RO systems have indicator lights or smart monitoring to alert you when replacements are due. Your local EcoWater dealer can handle annual service visits and keep your system performing at spec.
Most under-sink RO systems fit standard kitchen cabinets with minimal modification. You'll need a cold-water supply line connection, a drain saddle clamp for the wastewater line, and a small hole (typically 3/8") drilled in the sink or countertop for the dedicated RO faucet. Installation typically takes 1–2 hours. Some countertop and whole-house RO options exist for situations where under-sink installation isn't practical. A certified EcoWater dealer can assess your setup and recommend the right configuration.
Find a local installerWater Testing
If you're on a private well, the CDC recommends testing at minimum once a year for coliform bacteria and nitrates, and any time you notice a change in taste, odor, or appearance. Test for additional contaminants (arsenic, heavy metals, radon, VOCs) every 3–5 years, or if there's agricultural activity or industrial sites nearby. Municipal water users receive an annual Consumer Confidence Report from their utility — but that report reflects averages at the treatment plant, not necessarily what comes out of your tap. If your home has older lead pipes or solder, testing at the tap every 1–2 years is worthwhile.
Find a certified dealer near youHome test strips and DIY kits are inexpensive and fast — you can check pH, hardness, chlorine, and a handful of other parameters in minutes. They're useful for quick status checks but are not precise enough for regulatory compliance or identifying low-level contamination. Certified laboratory tests are far more accurate and can detect dozens of contaminants at very low concentrations, including heavy metals, nitrates, bacteria, and pesticides. For peace of mind about drinking safety, especially on well water, a certified lab test is the right choice. Your local EcoWater dealer can coordinate lab testing as part of a free water analysis.
Schedule a free water testAt minimum, test annually for total coliform bacteria (an indicator of pathogen risk), E. coli, and nitrates. Additionally, test every 3–5 years — or after nearby land use changes — for arsenic, lead, manganese, iron, hardness, pH, sulfates, and volatile organic compounds (VOCs). If you're near a gas station or dry cleaner, add BTEX compounds and chlorinated solvents. After flooding, always re-test for bacteria before resuming use. The EPA's private well testing guidance and your county health department can recommend location-specific tests based on your geography.
A Consumer Confidence Report (also called a Water Quality Report) is an annual document that every community water system serving more than 25 people must deliver to customers by July 1 each year. It shows the source of your water, all contaminants detected, the legal limit (Maximum Contaminant Level) for each, and the levels detected. You can find yours by searching your utility's website or the EPA's ECHO database. Note that CCRs report averages at the treatment plant — not levels at your tap, which can be higher for contaminants like lead that leach from household plumbing.
See EWG data for your ZIPFinding & Working with a Dealer
EDA member dealers are certified, independent EcoWater specialists who can test your water on-site, interpret the results, and recommend the right treatment solution for your specific water chemistry and household needs — without the pressure tactics of national chains. Use our dealer locator to find a nearby member, or browse their individual profile pages, which include live local water quality data for their service area.
Find a local EcoWater dealerIndependent EcoWater dealers are locally owned small businesses with deep roots in their communities. They typically offer more personalized service, faster response times, and aren't driven by corporate quotas that can lead to upselling or one-size-fits-all recommendations. EDA member dealers commit to the association's standards of practice and continuing education, and they have access to the full EcoWater product line including smart water management systems. National chains often have high technician turnover, franchise fees that get passed on to customers, and sales processes designed around volume.
A certified EcoWater dealer will typically visit your home and conduct an on-site water analysis that takes 30–60 minutes. They'll test for hardness, iron, manganese, pH, total dissolved solids (TDS), and other parameters relevant to your area. They'll walk you through the results, explain what each reading means for your appliances, plumbing, and health, and recommend treatment options tailored to your actual water profile and budget. There's no obligation to purchase anything.
Book a free water testCosts vary widely based on the type of system, household size, water hardness, and local installation factors. A high-quality salt-based water softener for a typical home ranges from $800–$2,500 installed. A whole-house filtration system adds $500–$3,000+ depending on complexity. An under-sink reverse osmosis system runs $300–$800 installed. Many homeowners find that the combination of extended appliance life, reduced soap and detergent use, and fewer plumbing repairs produces a positive return within 2–3 years. EcoWater dealers can provide a detailed cost-benefit analysis for your specific situation.
Get a quote from a local dealerLook for technicians certified by the Water Quality Association (WQA) — the CWS (Certified Water Specialist) and CI (Certified Installer) credentials require passing exams and ongoing continuing education. The WQA also certifies products against NSF/ANSI standards, so look for NSF-certified equipment when evaluating what's being recommended. EDA member dealers maintain up-to-date certifications as a condition of association membership, giving you confidence that you're working with a knowledgeable professional.
Find a WQA-certified EcoWater dealerStill have questions?
A certified EcoWater dealer can test your water on-site and walk you through exactly what's in it — free, with no obligation.
